New Rules for Resits and Retakes Under the RQF Framework

The Regulated Qualifications Framework (RQF) has changed how many health and social care qualifications are designed, assessed, and quality assured. As a result, learners, training centres, employers, and assessors need a clear process for managing further assessment attempts when a learner has not yet achieved the required standard.

A resit or retake is not simply an administrative repeat. It should be based on the assessment decision, the qualification specification, the learner’s evidence, and the awarding organisation’s procedures. Applying the wrong route can create unnecessary delays, duplicate assessment activity, or problems during internal and external quality assurance.

The precise rules vary according to the qualification and assessment method. Centres should therefore use the current qualification specification, assessment guidance, and centre policy when deciding what happens after an unsuccessful attempt. The general principles below provide a practical framework for making those decisions consistently.

How The RQF Affects Further Attempts

Under the RQF, qualifications are built around defined learning outcomes and assessment criteria. Learners must provide sufficient valid, authentic, reliable, and current evidence to meet those criteria. A further attempt should address the specific gaps identified by the assessor rather than repeat every activity automatically.

This approach supports fair assessment and protects the value of the qualification. If a learner has achieved some criteria within a unit, the centre may be able to arrange additional evidence for the criteria that remain outstanding. However, the centre must check whether the assessment specification permits partial achievement, a further attempt, or a complete reassessment.

Assessment decisions should also reflect the qualification’s level and purpose. A learner working towards an adult care diploma may need to demonstrate practical competence in the workplace, while a healthcare-related unit may rely on written assignments, professional discussion, observation, or a combination of methods. The resit process must match the original assessment requirements.

Changes to unit content can also affect the materials used by tutors and assessors. Centres reviewing their procedures should consider the guidance on updated unit specifications so that teaching resources, assessment briefs, and learner records remain aligned with the current qualification.

Resit And Retake Are Different Routes

The words “resit” and “retake” are often used interchangeably, but they can describe different actions. A resit normally means that a learner makes another attempt at an assessment after an unsuccessful result. The learner may be required to improve or replace specific evidence while retaining achievement that has already been confirmed.

A retake can involve repeating a larger part of the learning or assessment. It may be appropriate where the learner has not met the required standard across the assessment, where the original evidence is unsuitable, or where the qualification specification requires the unit or assessment to be completed again. Some awarding organisations use their own terminology, so the relevant policy always takes priority.

The difference matters because a further attempt should be proportionate. Requiring a learner to redo an entire unit when only one assessment criterion is incomplete may be inefficient and unfair. Allowing a limited correction when the assessment decision requires a full retake may be insufficient and could weaken confidence in the result.

Assessors should explain the decision in clear language. The learner should understand which requirements have not been met, what evidence is needed, whether further teaching is required, and when the next assessment can take place. A vague instruction such as “try again” does not provide enough direction for a controlled assessment process.

When A Learner Can Have Another Attempt

The starting point is the assessment decision. The assessor should identify the unmet learning outcomes or assessment criteria and record the reasons for the decision. This record gives the learner a clear route forward and allows the internal quality assurer to confirm that the proposed action is appropriate.

A further attempt may be suitable when the learner has made an isolated error, omitted part of an answer, or failed to provide enough detail in one area. The centre may arrange targeted support followed by a new submission or assessment. The replacement evidence must still meet the required standard and should be assessed using the approved criteria.

A retake may be necessary where the evidence is fundamentally inadequate. Examples could include an assignment that does not address the task, an observation that does not cover the required competence, or evidence affected by authenticity concerns. In these circumstances, the centre should follow its malpractice, plagiarism, or assessment-failure procedures rather than treating the matter as a minor correction.

Time limits should also be considered. Qualification specifications, centre policies, funding arrangements, and registration rules may place deadlines on assessment attempts. A learner who does not complete a further attempt within the permitted period may need a revised plan, a new registration, or a different qualification route.

Planning The Assessment Process

Before arranging a resit, the tutor or assessor should review the learner’s previous evidence and feedback. The aim is to identify the learning need, not simply to issue a second deadline. Targeted teaching, supervised practice, additional reading, or workplace experience may be needed before the learner is ready.

The assessment method should remain appropriate to the learning outcome. A written criterion should not be confirmed through informal conversation unless professional discussion is an accepted method. Similarly, practical competence should usually be demonstrated through observation or another approved method that shows the learner can perform consistently and safely.

The following framework can help centres distinguish the most appropriate response:

Situation Likely response Key control
A small number of criteria are incomplete Targeted resit or additional evidence Retain confirmed achievement and reassess only permitted areas
The submission does not address the assessment task Retake or replacement assessment Provide a new brief where required and check authenticity
Practical competence is not yet secure Further workplace practice followed by reassessment Use an approved observation method and suitable assessor
Evidence may be copied, fabricated, or misrepresented Malpractice investigation before any resit decision Follow the awarding organisation’s procedures
The learner has missed a deadline Review centre and qualification requirements Record the reason and agree a compliant assessment plan
Several attempts have been unsuccessful Formal review of support and assessment strategy Consider additional teaching, reasonable adjustments, or progression advice

The centre should also confirm who is authorised to approve the next attempt. In some cases, the assessor can arrange it directly. In others, the internal quality assurer, exams officer, or centre manager may need to review the decision first. Clear responsibility prevents learners from receiving conflicting instructions.

Evidence, Feedback, And Internal Quality Assurance

Feedback after an unsuccessful assessment should be specific, constructive, and limited to what the learner needs to improve. It should not provide an answer that allows the learner to reproduce the assessor’s wording without understanding the subject. Feedback should also avoid changing the assessment standard for an individual learner.

The assessor’s records should show the original assessment date, the criteria achieved, the criteria not yet achieved, the feedback provided, and the agreed action. When new evidence is submitted, the record should link it to the relevant criteria and identify the date and assessor. Accurate documentation makes the learner’s achievement easier to audit.

Internal quality assurance is particularly important where a centre permits partial resits. The internal quality assurer should check that the assessment decision is consistent with the qualification requirements, that the learner has been treated fairly, and that the new evidence is sufficient. Sampling should include successful and unsuccessful further attempts where required by centre procedures.

Centres should retain records for the period specified by the awarding organisation. Digital systems can help, but only if access controls, version histories, assessor signatures, and evidence storage are managed properly. A completed assessment record should make sense to someone who was not involved in the original decision.

Protecting Fairness And Assessment Integrity

A resit policy must support learners while preserving the credibility of the qualification. Every learner should have access to the same published process, although reasonable adjustments may be available for learners with disabilities or other eligible needs. Adjustments should remove unnecessary barriers without changing the competence or knowledge being assessed.

Employers also have a role when assessment takes place in the workplace. They may need to provide supervised practice, suitable activities, access to records, or opportunities for observation. Workplace support must not become coaching during the assessment itself, and any conflict of interest should be managed.

Centres should be alert to repeated attempts that indicate a wider problem. A pattern of unsuccessful assessments may suggest that the learner needs a different teaching approach, better access to resources, more practical experience, or a formal review of reasonable adjustments. It may also indicate that the assessment brief or delivery method needs scrutiny.

Where malpractice is suspected, the learner should be informed of the process and given an opportunity to respond in line with the relevant policy. A further attempt should not be arranged until the issue has been considered. This protects the learner’s rights and ensures that evidence submitted for certification can be trusted.

Actions For Centres And Employers

A practical resit and retake process should be visible to learners from the start of the qualification. Centres can strengthen consistency by:

  • Publishing the permitted further-attempt process in learner and assessor guidance.
  • Linking every assessment decision to the relevant learning outcome or criterion.
  • Providing targeted feedback and support before arranging a new attempt.
  • Checking qualification-specific deadlines, registration rules, and evidence requirements.
  • Sampling resit and retake decisions through internal quality assurance.
  • Training workplace supervisors to support development without influencing assessment evidence.

Learners should receive a written action plan after an unsuccessful attempt. The plan can state what has been achieved, what remains outstanding, what preparation is required, the assessment method, and the expected date for completion. This creates a shared record between the learner, assessor, centre, and employer.

Employers should keep communication open with the training centre, especially when the learner needs additional workplace opportunities. A short delay to gain genuine competence is preferable to submitting weak evidence that will lead to another unsuccessful decision. The priority is a reliable assessment outcome that reflects the learner’s ability in practice.

Put The Policy Into Practice

RQF assessment decisions should be accurate, transparent, and tailored to the qualification requirements. A resit is usually a focused opportunity to address specific gaps, while a retake may require broader reassessment or renewed learning. The correct route depends on the specification, the evidence, the assessment decision, and the awarding organisation’s rules.

Training centres should now review their learner handbooks, assessment policies, feedback templates, and quality assurance records. Employers can review how they support workplace practice and observation. Learners should ask for clear written feedback and understand what must be completed before the next attempt.

Use the current Highfield qualification guidance and centre procedures to create a consistent process for further assessment attempts. Early action helps protect learner progress, supports assessors, and maintains confidence in health and social care qualifications awarded under the RQF.

4 thoughts on “ 2015 HABC Regulated First Aid Qualification Assessor and IQA CPD Training ”

Leave a Reply

Your email address will not be published. Required fields are marked *

%d bloggers like this: